Best 20V Leaf Blowers (2026)

The DCBL722 is built around an axial fan, a design that moves air in a straight line along the fan axis and gives high volume for a given motor size. Combined with a high-efficiency brushless motor, it delivers up to 450 CFM and 125 MPH with the concentrator nozzle, a balance of volume and speed that most 20V blowers do not reach.

It is rated at 62 dB(A), noticeably quieter than most blowers in this class, which matters in noise-restricted neighborhoods. Compared with the 100 CFM DCE100B, it moves over four times the air, and against the BLACK+DECKER blower's 130 mph with no CFM rating, it clears heavier debris.

It is sold as a tool only, so you need a 20V MAX battery and charger. Keep the intake free of leaves, clean the fan housing, and store the battery partly charged.

WORX specifies airflow in CFM, which is a clearer description of how much it can move than a speed-only claim. Its 360 CFM turbine fan produces a wide, steady airflow stream that sweeps dry leaves from patios, decks and driveways.

Two speeds let you drop to low for flower beds and hard surfaces or go high for heavier piles. At 4.4 pounds with the battery it is light enough to carry for a long session. It trails the DEWALT XR's 450 CFM but costs less and includes the battery and charger.

It shares PowerShare batteries with a large tool family. Clean the fan intake of leaves, and charge the pack before storing for winter.

Craftsman's blower uses a brushless motor, which means longer runtime and a longer motor life than the brushed designs in this class. The claimed 24 minutes of runtime is a light-load figure, but brushless efficiency is a real advantage when working a small battery.

It quotes air speed up to 110 MPH, below the 125 MPH of the DEWALT XR and Neareen, and gives no CFM figure, so judge it by what it does on the lawn. It is also lighter than gas blowers, and much quieter.

As a V20 tool, it uses the same batteries as other Craftsman tools, which suits current owners. Keep the intake clear and charge the battery before winter storage.

This blower leads with air speed, quoting up to 130 MPH, and it is the lightest in the group at 3.7 pounds. Speed pushes light debris off hard surfaces like decks, garages and driveways, but without a CFM figure it will struggle to move a thick layer of wet leaves.

The 1.5Ah battery is small and holds a charge for a long time in storage, which suits occasional use. Compared with the WORX's 360 CFM, it moves less air but is lighter and cheaper. It is a good tool for small, quick jobs.

Parts and batteries for the 20V MAX platform are widely available. Keep the intake clear and avoid wet piles.

The Neareen is a bare tool built for DeWalt 20V MAX packs, with a brushless motor running at 21,000 RPM and a turbo mode. The listing claims up to 600 CFM, but it states plainly that this is an ideal-conditions maximum and real performance varies.

That 600 CFM figure sits well above the genuine DEWALT XR's 450 CFM, which should make you cautious, since a small brushless motor on a 20V pack is unlikely to out-move it. Treat the number as a marketing maximum and judge by the 125 MPH figure and the 3.5 pound weight. It is attractive if you already own DeWalt packs.

A third-party tool has no shared warranty with the battery. Check the pack fits firmly and clean the intake.

The DCE100B is a compact jobsite blower, not a yard tool. Its 100 CFM output is a quarter of the DCBL722's 450 CFM, which is why it excels at clearing sawdust, tuck-pointing joints and work areas rather than moving leaf piles.

A three-speed switch with a variable-speed trigger gives control, and three nozzle attachments let you direct air precisely. A lock-on trigger reduces fatigue. It is compact for tight spaces.

It is a bare tool, so you need a DeWalt 20V MAX battery. Keep the nozzles clean, and choose it only if cleaning small areas is the job.