The Greenworks kit gives you two tools on one powerhead: a pole hedge trimmer with a 20 inch dual-action blade and an 8 inch pole saw. The hedge head pivots through seven positions, which lets you angle the blade flat over the top of a tall hedge or vertically down its face from the ground. That angle range is the difference between a usable pole trimmer and a frustrating one.
The saw side has an automatic oiler and easy-adjust chain tensioning, which cut the usual chore of oiling by hand. A 2.0Ah battery and charger are included, whereas the 10 inch Greenworks combo below is tool only. The 20 inch blade is longer than the MITLEX's 16 inch, covering more hedge per pass.
The battery fits a very wide range of Greenworks 40V tools. Check chain oil, keep blades clean and store the battery inside. It suits owners with a mix of tall hedges and a few high limbs.
What works
- 20 inch dual-action hedge blade covers more per pass
- Seven-position head angles for tops and sides
- Automatic oiler and easy chain tensioning on the saw
- Battery and charger included, shared with many tools
Watch out for
- 8 inch saw bar limits limb size
- 2.0Ah battery is small for long sessions
- Pole and head add weight at arm's length
Spec sheet
- Hedge blade
- 20 in dual-action
- Pole saw
- 8 in bar and chain
- Head
- 7-position pivoting
- Oiler
- Automatic, on the saw
- Tensioning
- Easy adjust on the saw
- Battery
- 2.0Ah 40V and charger included





