The GPS8-17 monitors two power sources and switches to the backup within 0.2 seconds if the primary fails. A built-in LED display shows live voltage, and the module protects against over-voltage and under-voltage conditions before it commits to a source.
The feature that sets it apart is the priority selector. You can designate source one or source two as the preferred supply, so when the favored source returns, the switch moves back automatically. That is useful when the grid is the preference, and equally when a solar and battery system should be the first choice.
Compared with the VORTULIUK, you get the display and the priority logic, which make setup and troubleshooting easier. A module like this still needs a licensed electrician, a proper enclosure and a permit, and it should be matched to the generator's voltage and frequency. Because the display shows real voltage, it is also a handy diagnostic when a portable generator runs rough: you can see sag under load and decide whether to shed circuits. Owners should mount the module in a ventilated, dry enclosure, label both sources clearly and keep a printed copy of the setup values inside the door.
What works
- Fast switchover within 0.2 seconds
- Live LED voltage readout
- Adjustable preferred source
- Over and under voltage protection
Watch out for
- Module format needs a separate enclosure
- Listing marks need confirming for inspection
Spec sheet
- Amp rating
- 80A
- Voltage
- 110V single source pair
- Transfer time
- Within 0.2 seconds
- Display
- Live LED voltage readout
- Priority
- Adjustable L1 or L2 preferred source






