Afurkuot puts three things in one metal box: a 5-20P inlet, a circuit breaker and a reset button. The breaker is the part that matters on a bad day, because a generator plugged into an overloaded circuit trips this box rather than cooking the house wire. The knockouts are already punched, so the box accepts conduit without drilling.
It serves a single circuit at 125 volts, roughly 2,400 watts at the limit, which fits a gas furnace blower, a chest freezer or a sump pump but not a pair of those at once. Next to the RVMATE, this is the better choice if your generator has a 20 amp household outlet, since 15 amp cords and plugs do not mate with a 5-20 inlet in the same way.
Mount it where the cord can reach without crossing a doorway, run conduit to the appliance circuit, and label it clearly for whoever else lives in the house. A transfer arrangement like this still needs correct wiring and often a permit, so get that sorted before the first outage.
What works
- Built-in breaker protects the branch circuit
- Reset button returns power after a trip
- Pre-punched knockouts speed up conduit
- Matches common 5-20 generator outlets
Watch out for
- Feeds only one 120V circuit
- About 2,400 watts maximum
- Wiring still needs a competent installer
Spec sheet
- Rating
- 20 amp, 125 volt
- Circuits
- Single circuit
- Inlet
- NEMA 5-20P
- Features
- Circuit breaker and reset button
- Install
- Prewired with punched knockouts






