A probe that sits at plant height is the feature that makes this VIVOSUN a grow-room instrument rather than a household gadget. It measures temperature and humidity where the leaves are, so the unit reacts to the conditions your plants actually feel, not the air by the wall. The nine liter tank gives multi-day runs.
Phantom mode switches the screen off during operation, which avoids light interference with a dark cycle. That is a small detail that grow-tent users care about. Wi-Fi and a smart remote let you adjust it without opening the tent and letting the humidity out.
Against the BLEREMA 3L it holds three times the water and offers precise control, but it takes more space and needs a floor spot. Use filtered or reverse osmosis water, since ultrasonic mist carries minerals that can leave white film on leaves. Clean the tank weekly. Place the probe at canopy height, away from the mist plume, and leave the unit unplugged for a few minutes after a refill so the sensor settles. Check the first week of data against a separate hygrometer, since a probe that disagrees by several points needs repositioning, and note any condensation on the tent walls.
What works
- Probe measures at plant height
- Nine liter tank for multi-day runs
- Phantom mode avoids light leaks
- Wi-Fi control without opening the tent
Watch out for
- Large for a small tent
- Mineral film on leaves with hard water
Spec sheet
- Tank
- 9 L (2.38 gal)
- Type
- Ultrasonic cool mist
- Sensing
- Temperature and humidity probe
- Control
- Wi-Fi, smart remote
- Special
- Phantom mode turns the screen off





