The C10 stays at 2.85 in even though it carries a laser mapping system, which is an engineering trick worth noting. Most laser robots add a visible dome on top, and the listing's 2.85 in figure shows the maker kept the whole machine slim. It then empties itself into a 3 L bag at a dock for about eight weeks of hands-free running.
It makes do with 4,000 Pa and no mop, and that restraint is why the body stays so thin. Against the eufy 11S MAX it adds mapping and the dock, and against the Qrevo Edge 2 it skips the big wash station. For most beds and sofas, this is the sweet spot of slim and convenient.
The bag is the running cost. Wipe the dock intake, rinse the filter in the robot and keep the laser surface dust-free so the thin body does not hide a dirty sensor. Because the bin is small for its footprint, glance at it between dock trips in a home with pets. The 4,000 Pa label is honest for a machine in this class, and because the motor is small it also runs fairly quietly, which suits an evening schedule in a flat with thin walls. If you later move to a home with higher furniture, the same robot still works, so the slimness is not a one-room commitment.
What works
- 2.85 in body with laser mapping
- 3 L dock bag lasts about eight weeks
- Room control from a saved map
- Fits under the lowest furniture here
Watch out for
- Only 4,000 Pa
- No mop
- Small bin inside the thin body
Spec sheet
- Height
- 2.85 in
- Navigation
- LiDAR
- Dock bag
- 3 L, about 8 weeks
- Suction
- 4,000 Pa
- Cleaning
- Vacuum





