Best 3 Point Wood Chippers (2026)

The Titan uses a 30 inch oversized rotor, which is a heavy steel disc carrying the blades. A large, heavy rotor stores more rotational energy, so when a limb hits the blades the disc keeps its speed rather than bogging the tractor. That is how it reaches a stated 6 inch capacity, and the maker claims it also reduces vibration.

A self-feeding chute pulls branches in once you drop them, which saves effort and keeps your hands away from the rotor. Reversible blades give a second edge before replacement, and integrated air vents help prevent overheating. It is rated for tractors up to 70 horsepower, a higher ceiling than most here, which suits a utility tractor.

Compared with the 4 inch units, it needs a larger tractor and more lifting capacity, so confirm yours before buying. Grease the bearings, check blade bolts and inspect the PTO shaft each season. It suits owners of bigger properties.

The BILT HARD 6 inch is aimed at bigger tractors, with a stated 40 to 80 horsepower range and a PTO that runs from 540 to 1000 rpm. Few units here list both speeds, which matters if your tractor has a 1000 rpm PTO. It carries a 30 inch rotor with four hardened tool steel blades, each with two usable edges.

An angled hopper uses gravity to guide branches toward the rotor, and a safety curtain helps contain flying chips. It matches the Titan's 30 inch rotor and 6 inch capacity but sets a higher horsepower floor of 40 against the Titan's unstated minimum.

The Category 1 hitch limits it to tractors with that hitch, so check yours. Flip blades when one side dulls, grease the bearings and inspect the PTO shaft shear protection. It suits larger utility tractors.

The WC68H uses a hydraulic infeed, where hydraulic rollers grab the branch and pull it into the rotor at a controlled rate. Unlike a gravity-fed hopper, which relies on the limb's weight and the rotor's pull, a powered feed keeps working on awkward, bent or springy branches. That makes it more consistent on mixed brush.

It pairs this with direct drive from the PTO, sending the tractor's power straight to the rotor. It is rated for tractors from 20 to 50 horsepower, a lower ceiling than the 6 inch Titan at 70, and a much lower floor than the BILT HARD's 40. You do need hydraulic outlets on your tractor.

The maker provides one year of support on the machine. Check hydraulic hoses for leaks, grease the bearings and keep the blades sharp. It suits owners who process lots of awkward limbs.

The BX42S is the compact tractor choice: a 26 inch rotor with four hardened tool steel blades and a stated 4 inch capacity. The rotor includes winglets that create suction to throw chips out of the discharge, so it does not rely on gravity alone. A 360 degree rotary discharge chute lets you aim the chips.

The self-feeding hopper pulls limbs in once started. Against the 30 inch rotors on the 6 inch units, its smaller disc stores less energy, which is why capacity is lower. It includes the PTO shaft, saving a separate purchase.

The same machine is sold under several names, including a QEEKA model and a green MechMaxx listing, so treat them as duplicates. Grease bearings and check blade bolts after each use. It is a good fit for compact tractors.

The SinolinK lists the clearest compatibility band in the 4 inch group: Category 1 hitch tractors from 16 to 45 horsepower at 540 rpm. That specific 16 horsepower floor helps small tractor owners confirm fit. It carries four reversible hardened steel knives and handles limbs up to 4 inches.

Its 20 by 20 inch oversized hopper uses gravity self-feeding to draw material into the rotor. A 360 degree discharge hood and adjustable deflector let you control chip height and direction. Construction is high-strength carbon steel.

Compared with the MechMaxx BX42S, it states a lower horsepower minimum and a defined hopper size. Include the PTO shaft in your purchase check. Flip knives when one side dulls, grease the bearings and check the shear protection. It suits small tractors.

The BILT HARD 5 inch sits between the 4 and 6 inch classes, with a 25 inch rotor and a stated 5 inch capacity. It lists a standard 1-3/8 inch 6-spline 540 rpm PTO, the common shaft on compact tractors, and compatibility with a quick hitch, a feature many rivals do not claim.

Reversible double-edged blades give a second life before replacement, and a transparent debris curtain on the feed hopper helps control flying debris. Gravity feed brings material down toward the rotor. Its 15 to 50 horsepower range is the widest here at the low end, covering tiny tractors up to mid-size.

Because it uses a Category 1 hitch, confirm yours matches. Grease bearings, flip blades and check bolts regularly. It is a good middle-of-the-road pick.