Best Electric Pole Saws (2026)

The WEN CP0810 uses an 8 amp motor, about 960 watts, to drive a 10 inch bar at up to 36 feet per second. A telescoping pole adjusts from 6.7 to 9 feet for a stated overhead reach of 14 feet, and the listed weight is 8.4 pounds.

The tradeoff is the cord. When you reach overhead, the cord trails behind and you must keep it clear of the chain and the limb you are cutting. A 10 inch bar is larger than the 8 inch bars on most cordless saws, which gives it more capacity for thick limbs. Compared with the WEN 4019, it adds 2 amps and 2 inches of bar for about 1.7 pounds more weight.

Keep the bar oiled, wipe sap off the chain and inspect the cord for nicks before each use. Because the weight sits at the tip of the pole, take rests every few minutes. In year three the usual wear items are the chain and the bar groove, so sharpen early and flip the bar occasionally for even rail wear. A tidy habit is to coil the cord into loose loops on your belt hook or pole stand before each cut so it cannot catch on the limb.

The WEN 4019 has a 6 amp motor, about 720 watts, an 8 inch bar and a chain speed of up to 36 feet per second. Its telescoping pole runs from 5.3 to 7.3 feet for up to 12 feet of overhead reach, and the listed weight is just 6.7 pounds.

The tradeoff is power. Six amps is enough for green limbs of 3 to 4 inches but will slow down in dense dry wood. The low weight is its main advantage: at full extension, every pound at the tip multiplies, so a saw 1.7 pounds lighter than the CP0810 is noticeably easier on shoulders. Compared with the cordless EGO, it has no battery weight but has a cord.

Keep the chain sharp, oil the bar and avoid forcing it through dense limbs. If the motor tone drops noticeably, back off and let the chain recover, because a stalled small motor overheats quickly. For pruning apple, pear and ornamental trees it is an excellent match, and its low weight means you can work for longer between rests.

The WORX WG311 combines an 8 amp motor with a 10 inch bar, 28 feet per second chain speed and a pole that extends to give up to 10 feet of reach. It can also be used as a handheld electric chainsaw, and it weighs about 10 pounds.

The tradeoff is that it has the slowest chain speed of the corded group and the shortest reach, in return for versatility. At 10 pounds it is the heaviest corded saw here, which shows up when you hold it overhead. Compared with the WEN CP0810, it has the same amps and bar, but 2 pounds more weight and a lower chain speed.

WORX is a recognizable power tool brand, which helps with parts and support. Because it converts to a handheld saw, check that the pole-to-head latch is fully engaged before cutting overhead. As a pole saw it is best at modest heights, and as a handheld it is handy for cutting up limbs after they come down.

The EGO pole saw is rated for up to 100 cuts per charge on the included 2.5Ah battery, uses a telescopic carbon fiber shaft and has an LED cut line indicator. A carbon fiber shaft is stiffer and lighter than aluminum for the same length, which reduces flex at full extension.

The tradeoff is that you pay a premium for the shaft, the LED aid and the platform. Cuts per charge is a better metric than minutes of runtime for pruning, since you rarely cut continuously. Maker figures use small test branches, so for 3 to 4 inch limbs expect fewer cuts than the headline number. Compared with the Greenworks 40V, the EGO has a stiffer shaft and an aiming aid, and a more extensive tool platform.

Charge the battery, oil the chain and store the battery indoors. The carbon shaft is not conductive in the way metal is, but never rely on any pole near power lines; a shaft can still carry current when wet or dirty, and the safe approach is to stay at least ten feet from any line. Because the EGO battery fits other tools in the line, a second pack extends your working time for little extra.

The Greenworks 40V has an 8 inch bar, 31.2 feet per second chain speed, an 11 foot maximum reach and a three-piece aluminum shaft, with a 2.0Ah battery and charger. The maker states it is 70 percent lighter than a gas pole saw and quotes up to 15 minutes of continuous runtime.

The tradeoff is the 2.0Ah battery, which limits the session length. A three-piece shaft is easy to store but each joint adds flex. Compared with the EGO, it is lighter on the wallet and it shares batteries with other Greenworks 40V tools.

Store the battery indoors and clean the bar and chain after each session. Aluminum shafts conduct electricity, so keep well away from power lines. With its 11 foot reach the saw suits trees up to around 15 feet when you account for your own height, and for anything taller you should use a longer-reach tool or a professional.

This Greenworks kit pairs an 8 inch bar pole saw with a pole hedge trimmer that has a 20 inch dual-action blade and a seven-position pivoting head, powered by a 2.0Ah battery and charger on the 40V platform.

The tradeoff is that two tools share one battery, which means shorter runtime for each. It is an economical way to cover both tree and hedge work, but if you only prune trees you do not need the hedge head. Compared with the single-purpose Greenworks saw, it gives you more versatility from one kit.

Keep the blades clean and the chain oiled. Swap the tool heads with the battery removed, and store the hedge head with its blade cover in place. Remember that the pole hedge trimmer is designed for horizontal passes at height, so use it for the top of tall hedges and leave low trimming to a handheld tool.