Amazon affiliate links - we earn a commission.Affiliate disclosure

Buying guide · 12 min read · Updated 2026-11-07

Best Food Processors for Peanut Butter (2026)

Seven food processors and choppers that can turn roasted nuts into smooth peanut butter, ranked by motor, bowl scraper design, bowl size and cleanup.

James MillerBy James MillerLead Machine Editor7 machines comparedSpec-sheet verified
Best Food Processors for Peanut Butter

At a glance

Our top picks

Side by side

Spec comparison

Peanut butter is one of the hardest jobs you can give a food processor. Roasted nuts go through crumbs, then a thick paste, then a glossy butter, and the middle stage is where weak motors stall and bowls get stuck with a dry cake on the walls.

A good machine for the job needs a stable base, a sharp blade and a way to move the mixture back into the blades. We rank the options by how well each one is built for that long, thick run rather than for light chopping.

Before you buy

6 Criteria to Look For Before Buying a Food Processor for Peanut Butter

  1. 01

    Scraper beats wattage

    A built-in scraper, as on the bella CHOP and the Hamilton Beach 10-cup, keeps the nut cake from clinging to the walls. That does more for texture than a few extra watts. Without one, plan on stopping and scraping every minute.

  2. 02

    Motor watts and heat

    Peanut butter is a long, thick run. A 450-watt base like the Hamilton Beach is a practical minimum, while the 200-watt Ninja Express Chop cannot reach butter. Peak ratings such as the bella's 800 should be treated as burst figures, so allow rest breaks.

  3. 03

    Bowl size for the batch

    Bigger is not better here. A 10-cup bowl suits a full jar, but a 4-cup bowl keeps a small batch in contact with the blade. The Hamilton Beach 14-cup set includes a 4-cup bowl for exactly that reason.

  4. 04

    Hands-free running

    Nut butter takes minutes, so a press-and-hold control tires the thumb. The Ganiza's dial keeps running without holding a button. Most pulse-only machines need you to tap repeatedly.

  5. 05

    Oil and cleanup

    Peanut oil clings to plastic and clouds it over time. Rinse right after use and wash by hand. Glass or metal bowls hold up better than clear plastic if nut butter is a weekly habit.

  6. 06

    Storage of blades

    A sharp blade that lives loose in a drawer is a hazard. The KitchenAid KFP0718 stores its blades in the bowl, and the bella has a drawer. Pick a design that keeps the blade covered.

Detailed reviews

The 7 best food processors for peanut butter, explained

01
bella CHOP 10-Cup Food Processor with Scraper
10-cup bowl800 peak WBowl scraper
Check price on Amazon
Best for: Home cooks who plan to make nut butter regularly and want a scraper that does the stirring.

Nut butter needs the walls scraped every minute or two, and this machine builds that into the lid. An integrated scraper sweeps the sides of the 10-cup bowl as you work, which keeps the dry cake of ground nuts from sitting out of reach of the blade. It is the one feature that most clearly separates a machine that makes peanut butter from one that merely survives it.

The 800 peak-watt motor figure should be read as a burst number, not a steady rating. It is strong enough to drive through the crumb stage, but plan on pauses to let it cool. Beside the Hamilton Beach 10-cup, which also has a scraper, the bella adds a built-in storage drawer for blades and a more modern look.

The drawer matters in year three, because loose blades are a hazard and a missing disc is a replacement order. After oily runs, hand wash the bowl and lid, since peanut oil lingers on plastic, and wipe the base with a damp cloth.

What works

  • Integrated scraper keeps the walls clear
  • 10-cup bowl gives room for a full batch
  • Built-in drawer stores blades safely
  • Strong peak-watt rating for the crumb stage

Watch out for

  • 800 W is a peak figure, so rest the motor
  • Oily runs leave residue on the plastic

Spec sheet

Bowl capacity
10 cups
Motor
800 peak watts
Scraper
Integrated bowl scraper
Storage
Built-in blade drawer
Finish
Oatmilk
02
Hamilton Beach 10-Cup Food Processor 450 W
10-cup bowl450 W motorBuilt-in scraper
Check price on Amazon
Best for: Budget-minded cooks who want scraper convenience for occasional nut butter.

The Hamilton Beach uses the same scraper idea as the bella at a clearly lower tier. Turn the handle on the lid and the paddle sweeps the bowl, which saves you from opening the lid with oil on your fingers. A 450-watt motor is the practical minimum for peanut butter, and in a ten-cup bowl it has room to work.

The cost of the low tier is headroom. It will make peanut butter, but expect to run it in cycles of a minute or two with rests, because a long continuous grind heats a base of this size. The bella's higher peak rating gives it a little more margin, though both are best for one jar at a time.

Upkeep is simple. The Easy Clean bowl design has few crevices where nut oil can hide. Rinse it in warm water straight after use and let it dry upright, and do not use abrasive pads on plastic that has been exposed to oil.

What works

  • Built-in scraper at a low tier
  • 450 W motor is a workable minimum
  • 10-cup bowl suits a full jar
  • Easy Clean bowl is simple to wash

Watch out for

  • Needs rest breaks during long grinds
  • Plastic bowl holds nut oil smell

Spec sheet

Bowl capacity
10 cups
Motor
450 W
Scraper
Built in
Attachments
Slice/shred plus chop blade
Tier
Low in this guide
03
KitchenAid 7-Cup Food Processor KFP0718
7-cup bowl3 speedsAll-in-one storage
Check price on Amazon
Best for: Cooks who value tidy storage and speed control more than a built-in scraper.

This is the cleanest-handling machine on the list. All the blades and discs store directly in the bowl, and the bowl assembles with a single click and a latched lid. It has three speeds plus pulse, which gives you more control during the crumb stage than a simple on and pulse panel.

Its limit for peanut butter is bowl size. A seven-cup bowl holds a modest batch, and without a built-in scraper you will stop and scrape with a spatula. That is workable but slower than the bella or Hamilton Beach. Against the Cuisinart FP-5, it offers more speed control and a larger bowl.

The all-in-one storage is the reason many owners keep it out: nothing is lost. Wash the bowl by hand if you grind nuts often, because oil clouds plastic, and keep the blade stored inside so the sharp edge is covered.

What works

  • Blades and discs store inside the bowl
  • Three speeds plus pulse
  • One-click assembly
  • 2-in-1 feed tube

Watch out for

  • No built-in scraper
  • Seven cups caps the batch size

Spec sheet

Bowl capacity
7 cups
Speeds
Three plus pulse
Storage
Blades and discs store in bowl
Assembly
One-click bowl, latched lid
Feed tube
2-in-1
04
Hamilton Beach Stack and Snap 14-Cup with 4-Cup Bowl
14-cup bowl4-cup bowl4 attachments
Check price on Amazon
Best for: Cooks who want one machine for nut butter in the small bowl and large-batch prep in the big one.

Two bowls make this the flexible choice. The 14-cup bowl takes big batches and kneading, and the 4-cup bowl handles smaller jars of peanut butter where a large bowl would spread nuts too thinly. Smaller bowls keep the nuts in contact with the blade, which helps the crumb turn to paste.

Stack and Snap assembly means the parts click together without twist-lock alignment. That is helpful if wrists are tired from the scraping. The four attachments cover slicing, shredding, chopping and kneading, so the machine does more than nut butter.

The trade is the lack of a scraper. Plan to pause every minute, remove the lid and push the cake back with a spatula. Keep the small bowl for nut butter and reserve the large bowl for everything else, so oil does not linger in the big bowl.

What works

  • Small 4-cup bowl suits a single jar
  • 14-cup bowl handles big jobs
  • Stack and Snap assembly is simple
  • Four attachments for other tasks

Watch out for

  • No scraper, so manual stopping is needed
  • Two bowls take more storage

Spec sheet

Large bowl
14 cups
Small bowl
4 cups
Attachments
Slice/shred disc and chop blades
Assembly
Stack and snap
Tasks
Slice, shred, chop, puree, knead
05
Ganiza 4-in-1 Food Processor with Two 4-Cup Bowls
Two 4-cup bowlsDial control4-blade
Check price on Amazon
Best for: Cooks who want hands-free running during the long nut butter grind.

The dial is the headline. You turn it to Low or High and the machine keeps running until you stop it, so you do not have to hold a button for the minutes that nut butter needs. That is a real ergonomic gain for a long grind, where press-and-hold machines tire the thumb.

Its two 4-cup bowls and four-blade design keep a small batch circulating, which suits a single jar. The sealed lid has a groove to pour oil through, handy for adding a splash as the butter forms. The 600 peak-watt rating is a burst figure, so rest the motor between runs.

Small bowls mean small batches, and you will make several rounds for a family jar. Rinse the blades promptly, because peanut oil dries sticky, and wipe the lid groove with a cloth. Keep the machine on a non-slip mat as it works.

What works

  • Dial keeps running without holding a button
  • Four-blade design circulates small batches
  • Pour groove for adding oil
  • Sealed lid limits splatter

Watch out for

  • Four-cup bowls limit batch size
  • Peak-watt rating means rest breaks are needed

Spec sheet

Bowls
Two 4-cup
Motor
600 peak watts
Control
Dial, Low or High, no hold
Blades
Upgraded four-blade
Lid
Sealed with pour groove
06
Cuisinart FP-5 5-Cup Chop and Shred
5-cup bowlChop and shredNests in bowl
Check price on Amazon
Best for: Small kitchens that only occasionally make a small jar of nut butter.

The FP-5 is not marketed for nut butter, and that is an honest starting point. It is a chop-and-shred machine with a five-cup bowl, so it can handle small batches of nuts but without a scraper or speed dial to help. Choose it if peanut butter is a rare job in a kitchen that mostly chops and shreds.

Its value is compactness. The blade and disc nest in the bowl and the cord stores away, so it takes the least room here after the mini chopper. For nuts, work in small amounts, scrape often and expect to stop for cooling.

Give it short runs and lots of patience. Clean the bowl with warm soapy water right after oily use, since cooled nut oil clings, and keep it from overheating by never running more than a minute or so at once.

What works

  • Compact footprint, parts nest inside
  • Handles chopping and shredding too
  • Simple controls
  • Easy to store

Watch out for

  • Not designed for long nut butter runs
  • No scraper or speed control

Spec sheet

Bowl capacity
5 cups
Blades
Universal chopping blade
Shredding
Reversible disc
Storage
Parts nest in the bowl
Role
Compact all-rounder
07
Ninja Express Chop 16-Ounce 200-Watt Chopper
16 oz bowl200 W motorPulse
Check price on Amazon
Best for: Quick nut grinding and small jobs, not full peanut butter batches.

A 200-watt motor and a 16-ounce bowl set the ceiling here. This is a chopper for nuts, herbs and dressings, and the listing names nut chopping and grinding among its jobs. It can crumb peanuts, but turning crumbs into true butter is beyond a motor of this size.

Think of it as a way to grind nuts to a fine meal or to start a small paste that you finish elsewhere. It sits below the Ganiza and the bigger Hamilton Beach models in power and is the cheapest machine in this lineup.

Use it for small, short jobs, and do not push it. Press the pulse in bursts, let the motor rest and rinse the bowl immediately because peanut oil is hard to remove once dry.

What works

  • Cheapest and smallest option
  • Pulse control is simple
  • Good for nut meal and chopped nuts
  • Easy to store

Watch out for

  • 200 W is too weak for true butter
  • 16-ounce bowl is tiny

Spec sheet

Bowl capacity
16 ounces
Motor
200 W
Control
Manual pulse
Uses
Nuts, herbs, spices, dressings
Tier
Lowest in the guide

Spec sheet decoder

What the numbers on the box really mean

The specs manufacturers lead with, translated into what they tell you about real-world performance.

Bowl scraper

A paddle on the lid that sweeps the bowl walls as you turn a handle or run the motor. It keeps thick food moving.

Watch forThe bella and Hamilton Beach 10-cup have one; the others do not.

Peak watts

A short-burst figure, often seen at start-up. It does not describe sustained power.

Watch forThe bella lists 800 peak and the Ganiza 600 peak.

Dial control

A switch that stays on until you turn it off, unlike press-and-hold buttons.

Watch forThe Ganiza's dial is the clearest example here.

Bowl volume

The brim capacity, not the working amount. Small batches work best in smaller bowls.

Watch forThe 4-cup bowls and the 16-ounce chopper suit single jars.

All-in-one storage

Blades and discs live in the bowl or a drawer. It stops parts going missing.

Watch forThe KitchenAid and bella both advertise it.

Methodology

How We Evaluated These Food Processors for Peanut Butter

Thick-load design

We asked whether each machine is built for a long, thick grind, looking at scraper design, bowl size and stated motor. A scraper was weighted heavily. Machines without one were ranked on how easy they make manual scraping.

Motor reality

We read wattage from 200 to 800 with attention to peak versus steady figures. A 450-watt steady motor beat an unexplained peak claim. The 200-watt Ninja was graded as a nut chopper.

Bowl fit

We matched bowl size, from 16 ounces to 14 cups, to a typical jar of nut butter. Mid-size bowls ranked well, and two-bowl sets earned credit because a small bowl keeps a short batch of nuts in contact with the blade.

Cleanup after oil

We considered crevices, dishwasher notes and bowl material. Machines with simple bowls and storage drawers scored better. Oil residue was treated as a long-term issue.

Value

We ordered the seven by price tier, from the Ninja Express Chop to the bella CHOP, and asked what each step adds. The scraper tier is where the value jumps.

Decision guide

How to Choose the Right Food Processors for Peanut Butter

By Batch Size

SituationPickWhy
One small jar occasionallyCuisinart FP-5Compact, stores easily
One jar a weekHamilton Beach 10-CupScraper and 450 W
Big batchesbella CHOP 10-CupScraper and larger peak rating
Small batch in a small bowlHamilton Beach 14-Cup setIncludes 4-cup bowl
Nut meal or crumbsNinja Express ChopSmall chopper

By Budget

TierPickWhy
LowestNinja Express ChopCheapest, nut chopping only
LowHamilton Beach 10-CupScraper at a low tier
Lower midCuisinart FP-5Compact chop and shred
MidGaniza 4-in-1Dial control
Upperbella CHOP 10-CupScraper and storage drawer

Scraper vs No Scraper

With a scraper

The bella CHOP and Hamilton Beach 10-cup keep the nut cake moving as you grind. They suit regular nut butter makers.

Without a scraper

The KitchenAid, Ganiza, FP-5 and Ninja need you to stop and scrape. They suit occasional use.

Pick a scraper if nut butter is a habit, and the others if it is a once-in-a-while treat.

By Control Style

PreferencePickWhy
Hands-free runningGaniza 4-in-1Dial stays on
Three speeds plus pulseKitchenAid KFP0718Fine control
Single pulse buttonNinja Express ChopSimple
Simple on and pulseCuisinart FP-5Easy to learn

For Smooth Peanut Butter Specifically

Look for

A scraper, a base of at least 450 watts and a bowl that fits the batch. Roast the nuts first, add them warm and run in cycles with rests. A splash of oil helps at the paste stage.

In this comparison

The bella CHOP 10-cup and Hamilton Beach 10-cup are the two that suit this job best.

When to Spend More

Spend more if

You make nut butter weekly. The bella CHOP with its scraper and drawer saves time every batch.

Save if

You make it a few times a year. The Hamilton Beach 10-cup is enough.

Ownership

Maintenance schedule

The upkeep that decides whether this machine lasts two seasons or ten.

TaskIntervalWhy it matters
Rinse oil immediatelyAfter each batchNut oil hardens and clings once it cools. Warm soapy water lifts it quickly.
Wipe the lid grooveAfter oily runsPeanut oil collects in lid grooves and seals. A cloth keeps it from going rancid.
Check the base for heatDuring long runsA warm base is normal, a hot one means rest. Let it cool before the next cycle.
Store blades coveredAfter each washStored in the bowl or drawer, the sharp edge stays safe and protected.
Deep clean the bowlMonthlyOil leaves a film that holds odors. A soak in warm water with a little baking soda removes it.

FAQ

Frequently Asked Questions

Can any food processor make peanut butter?

Most full-size processors can, but results vary with motor and bowl design. A scraper and a 450-watt motor help a lot. Tiny choppers can crumb nuts but rarely reach smooth butter.

How long does it take?

Expect several minutes in total, with pauses for scraping and cooling. The nuts go from crumbs to a thick paste to a glossy butter. Add a little oil if it stays dry. Salt goes in at the end, and the butter thickens as it cools, so judge the texture after it rests rather than straight from a warm bowl.

Should I roast the peanuts first?

Yes, roasted nuts release their oil more easily and give a richer flavor. Warm nuts blend more smoothly. Let them cool slightly so the motor is not strained.

Why does my processor stall?

The paste stage is thick and drags on the motor. Scrape the walls, work in smaller batches and rest the machine. If the blade spins in a hollow, the cake has packed against the walls, so stop, break it up and start again. A stronger base or a scraper helps.

Is a nut butter maker better?

A dedicated machine is built for the job, but a processor does more. If you make large jars weekly, consider one. For occasional jars, a processor is enough.

How do I clean peanut oil residue?

Rinse in warm soapy water right after use and wash the lid grooves, the pusher and the underside of the lid, where a thin layer of oil collects and goes stale first. A baking soda soak removes lingering smell. Avoid leaving oil to dry.

Bottom line

The short version

Browse more food processors for peanut butteron Amazon →
James Miller, Lead Machine Editor

About the author

James Miller

Lead Machine Editor, MachineFanatic

James Miller leads MachineFanatic's buying guides, turning spec sheets, manuals and owner feedback into clear verdicts on power tools, outdoor power equipment, shop machines and kitchen machines.

More from James →

Keep reading

Related guides