The pump is the point of this model. A built-in pump lifts condensate through a hose to a sink, a standpipe or outdoors, so a basement without a drain on the same level is no longer a problem. Many standard compressor units rely entirely on gravity, which is why this variant earns its place in the range.
On capacity it matches the other 50-pint Frigidaire units, one step below the 60-pint model and well above the 35-pint. That is a sound size for a basement of roughly 2,500 to 3,500 square feet with a moderate problem. The washable filter and custom humidity control follow the brand template.
Expect to check the hose for kinks and verify the pump runs after a long idle period. In a basement that stays dry in winter, the pump can sit unused for months, so run it through a cycle at the start of each humid season. Route the discharge hose so it cannot kink behind the cabinet, and secure the far end, since a loose hose end is the usual cause of a puddle.
What works
- Built-in pump lifts water to a distant drain
- 50-pint capacity suits mid-size basements
- Washable filter keeps upkeep cheap
- Custom humidity control holds a setpoint
Watch out for
- Pump is an extra part to maintain
- Costs more than the same size without a pump
Spec sheet
- Rated capacity
- 50 pints per day
- Pump
- Built in
- Filter
- Washable
- Control
- Custom humidity setting
- Best space
- Basement with no floor drain






