A combination machine does two jobs in one body: it works as a batch bowl cutter with the S blade, and with the continuous-feed head fitted it slices, shreds and grates produce straight into a container. The R2N CLR does both from a 1 HP motor and a 2.9 liter bowl, which is why it earns the top spot for a kitchen that cannot afford a separate slicer.
The batch bowl is clear polycarbonate, so you can see the texture and stop at the right second, and the smooth S blade is the same style used for emulsions, pates and purees. A three-button panel with on, off and pulse is all the control the machine needs, and it removes any doubt for a rotating staff.
Compared with the plain R2B cutter mixer, it adds the slicing head and costs more. Compared with the CL50, it has a smaller feed opening but also a bowl. Parts are stocked by restaurant suppliers, so a lost disc or a cracked lid is an order, not a replacement. It is a machine built to be washed hard daily. Fit the lid until it seats, because the interlock works through the lid and will refuse to start a machine that is only partly closed, a safety feature that new staff often mistake for a fault.
What works
- Works as a bowl cutter and a continuous slicer
- 1 HP induction-style commercial motor
- Clear bowl shows the texture
- Parts stocked by restaurant suppliers
Watch out for
- Heavy and needs a dedicated spot
- Costs far more than home machines
- Disc head adds parts to wash
Spec sheet
- Bowl
- 2.9 L clear polycarbonate
- Motor
- 1 horsepower
- Type
- Combination, batch and continuous
- Blade
- Smooth S blade
- Controls
- 3-button panel






