The 600 is the sweet spot for a house with a forced-air furnace. It is a bypass unit that routes warm air through a water panel, so there is no tank and no refilling, and its 17 gallons per day suits a large home. Dual sensors watch indoor humidity and outdoor temperature, lowering the target as it gets colder to limit window condensation.
It uses the furnace blower for airflow, so output depends on the system, and it needs a plumbed water line, a drain and a cut in the plenum. At this cap you pay for the machine and installation falls on you or a contractor. Against the 500 it gives more output, and against the plug-in consoles it humidifies every room.
Change the water panel once a season, keep the furnace filter clean and set the damper to summer in warm months. Hot water supply to the unit gives the best output, so ask the installer to tap the hot line where the plumbing allows. A house that reaches its target humidity without the unit running constantly is a sign the sizing is right.
What works
- 17 gallons per day listed
- Automatic control with an outdoor sensor
- No tank to fill
- Humidifies every room through the ducts
Watch out for
- Needs plumbing and a cut in the plenum
- Output depends on the furnace blower
Spec sheet
- Model
- AprilAire 600
- Output
- 17 gallons per day
- Coverage
- Up to 5,000 sq ft in tight homes
- Type
- Bypass evaporative
- Control
- Automatic, indoor and outdoor sensors






