The Pro/Tran layout is a double-throw switch bank, so each circuit has its own lever that moves between utility and generator power. That mechanical interlock means a circuit can never connect to both sources at once, which is the whole safety purpose of the box. The kit ships with an 18-inch flexible conduit whip that meets the load center, so the installer is not hunting for fittings.
It is rated for generators up to 7,500 running watts, matching the L14-30 outlet on most mid-size portables. Ten circuits is generous next to the six-circuit Reliance 31406CWK, and it lets you cover a furnace blower, a fridge, a freezer, lights and a sump pump without dropping any of them. The cost is a larger box, so you need wall space beside the main panel.
Ownership is quiet. Reliance parts and instructions are widely mirrored, so a second electrician can service it years later. Label every lever clearly and keep a written load list taped inside the panel door.
What works
- Ten circuits cover furnace, fridge, freezer and lights
- Mechanical interlock prevents dual-source connection
- Conduit whip included, fewer parts to source
- Brand layout is familiar to most electricians
Watch out for
- Box is physically large for a tight panel wall
- Needs a licensed install and often a permit
Spec sheet
- Amp rating
- 30A
- Circuits
- 10
- Generator limit
- 7,500 running watts
- Included
- Switch, inlet box, 18-inch whip
- Enclosure
- Indoor or outdoor inlet






