Best Pole Saws Under $150 (2026)

The Greenworks is the only complete branded kit here, with an 8-inch bar, a battery and a charger. Its 40V platform is shared with mowers, trimmers and blowers, so the pack has uses beyond this tool. A mainstream brand means a warranty, replacement chains on shelves and a service channel if something fails.

The 11 foot maximum extension is a more conservative claim than the 15 and 16 foot figures on import kits, and it is closer to what the pole actually does. The 2.0Ah pack is small, so it suits pruning rather than a morning of storm cleanup.

Ownership is simple: keep the chain oiled, check tension, store the battery indoors. It is the pick for a homeowner who wants one reliable cordless pole saw. Before a big pruning day, charge the pack, oil the chain and run the saw at ground level for a few seconds to confirm it is working. Cut larger limbs in stages so the weight falls clear of you and any fences.

The DOOYUTOOL offers the longest bar in the group at 10 inches and ships with a 4.0Ah battery, which is unusual for a tool built around DeWalt compatibility. A 10-inch bar handles thicker limbs than the 8-inch saws, and the 2-in-1 design lets it work as a handheld chainsaw.

The battery in the box means you can start cutting without owning DeWalt gear, though the pack is the maker's own and may not be a DeWalt original. Third-party compatibility depends on pack contacts and has no support from DeWalt.

Keep the chain oiled and the connection clean. It is the choice if you want a longer bar at a modest cost. Fit the pole carefully, tightening each section until the locks click, then lift it overhead with both hands before you start cutting. A saw this long magnifies every wobble. The extra bar length is also useful for storm-damaged limbs that have already started to split, where a longer bar finishes the cut in one pass.

The YardenX gives you two 4Ah batteries and an 8-inch bar with a claimed 15.5 foot reach. The extra pack means you can swap and keep cutting, which is the most practical benefit of an import kit.

The reach claim includes your height, so the pole itself is shorter. The 2-in-1 design lets you remove the pole and use the head as a handheld mini chainsaw.

Store the packs indoors and keep the chain sharp. Keep both packs rotated evenly so neither wears out first, and charge the empty one while you use the other. Note the total weight with a battery installed, since the head is the heaviest part. Because the head is a pivot point, a good habit is to keep your hands apart on the pole to improve control and reduce wobble.

The Supstable includes both an 8-inch and a 6-inch bar, so you can use the small one for thin growth and the larger one for limbs. Swapping bars is a short job, and it saves buying a second tool.

Its reach claim is up to 16 feet, the longest on the list, and the same caveat applies about arm height.

Check the box for batteries, since contents vary by listing. Swapping bars is a few minutes of work with the supplied tool. Always re-tension the chain after a swap, and keep the unused bar clean and dry. The shorter bar is gentler on a tired arm, which matters if you cut for an hour at a time.

The AVADA is a brushless 2-in-1 built around DeWalt 20V batteries, with two bar sizes. A brushless motor wastes less energy as heat and gets more cutting from each pack.

The 1200W label is a peak claim.

It is best for DeWalt owners. Confirm that the pack contacts fit before the first cut, and check the listing for whether a battery is in the box. Because the maker is not DeWalt, treat warranty claims as the seller's business. Look for a version with a battery in the listing title, since this style of product is sold in several variants that look similar.

The CRAFTSMAN is a bare tool that claims up to 325 cuts per charge and 14 feet of reach on the V20 battery family. A cut count is a useful statement of real work, though the maker's test wood matters.

Without V20 batteries it is not a complete purchase.

Store the battery indoors. Because the listing shows a cut count rather than a power figure, think of it as a measure of stamina. Treat it as a ceiling that depends on the wood and the chain. Remember that a cut count depends on wood species and diameter, so a figure in pine will not hold in oak.